Home > Windows Xp > HD Drives Stopping XP Loading

HD Drives Stopping XP Loading

Contents

The 137GB limit is in decimal bytes notation.In the metric system "G" stands for Giga (greek for giant), also known as a billion, or 10 to the 9th power, which equals That looks like an OPTICAL drive, not the old IDE HDD. An electrical short is often the cause of reboot loops and hard freezes while Windows is starting. I did some googling and found the following instructions on Enabling Big LBA.

gamerk316Oct 2, 2008, 11:30 PM The issue is this: if my 1TB drives work, its obviously not a windows XP problem.And where exactly did I say i was using a laptop? Some of us are familar with this merry go round. I made this drive the balance of the HDD, or 130 GB.7- The only issue I had: I did have to re-load some of the Windows XP files (and subsequent updates), You might not care since you can't start Windows normally anyway, but it's something I wanted you to be aware of. http://ccm.net/forum/affich-438298-computer-stuck-at-windows-xp-loading-screen

Windows Xp Won't Start

My boot screen from my WD Scorpio Blue 250Gb in my Dell Inspiron 9100 read “A Disk Read Error Occurred” Press Ctrl + Alt + Del to Restart. Thank you for signing up. Figure A Recovery console You'll then see a Recovery Console menu, like the one shown in Figure B. joluk44Apr 30, 2013, 11:37 AM im thinking this is a different bios setup, as there is no choice of optical drive anywhere in the boot setup.

How do I do this in a way to preserve C: as the main Windows/Program Files/etc. Now I am finally understanding that I had still used a size that was beyond my BIOS limit. In BIOS Setup go to where you set the Boot Priority Sequence. Windows Xp Startup Repair Without Disk I figured it was bad because of noises coming from it while attempting to boot (sounded a bit like grinding sounds).

So if there's a problem rooted in the Boot.ini file, it can render Windows XP incapable of booting correctly. Windows Xp Won't Boot In Safe Mode Back to top #11 hamluis hamluis Moderator Moderator 51,971 posts ONLINE Gender:Male Location:Killeen, TX Local time:07:27 AM Posted 14 March 2014 - 11:04 AM In order for XP to The second device should be your old IDE HDD. http://www.tomshardware.com/answers/id-1654525/hdd-stops-boot.html Win XP in all versions does NOT know how to use AHCI devices (SATA drives) without a suitable driver, so it can;t BOOT from a real SATA drive unless you actually

So try setting that to "Legacy" to see if XP can boot that way. Start Windows Normally Problem Xp Here's How to Fix It Article Here's How to Access the Advanced Boot Options in Windows Article Get Back in to Windows After an Error Using LKGC Article Have a BSOD Is that likely to stop this error? I also found a website called 48bitLBA.com which will analyse your compter for you and automatically change the registry value.

Windows Xp Won't Boot In Safe Mode

domiiiAug 5, 2010, 4:23 AM Just wanted to post and let you know one more thanking you for the info about the 137GB limit.Same story WD 320GB replacement hard drive, one https://www.raymond.cc/blog/move-windows-xp-hard-drive-or-change-motherboard-without-getting-blue-screen-of-death/ Never knew that or needed to know before this problem. Windows Xp Won't Start Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy

Windows Xp Startup Problem for a reasonable fee...

We all in this thread know that this answer is a porky!!!!!!! PrudenceAug 26, 2009, 6:26 AM Thanks for the info and "link" for more info. A physical problem with your hard drive is certainly a reason why Windows might reboot continuously, freeze completely, or stop in its tracks. If you cannot get it off the motherboard, you may be able to use the HDT utility on the bootable Ultimate Boot CD In order for XP to see the Windows Xp Not Starting In Any Mode

Thus I have 250G worth of space (less the 8+ meg used for System Volume information on NTFS formatted drives. A few simple how-to steps after the jump.To turn off indexing: Advertisement Open up "My Computer."Right-click on your hard drive (usually "C:") and choose "Properties."Uncheck the box at the bottom that Now, Windows XP will hang up when it encounters the error and with any luck, it will display a stop message you can use to diagnose the problem. #9: Restore from My home pc specs Back to top #9 yu gnomi yu gnomi Topic Starter Members 508 posts OFFLINE Gender:Male Location:Chicago suburb Local time:07:27 AM Posted 14 March 2014 - 10:29

Solution was to download a Cab file unzipper which I unzipped Service Pack 3 and replaced the 8 newer drivers with the Service Pack 2 8 drivers and used the Utility Windows Xp Recovery Console I turned off for the day I have spent 20 hours arranging things on this Dell Inspiron with this new Hdd, which is remarkably quiet compared to the original Hdd. kulwanMar 20, 2010, 7:03 AM Possibly your hard drive is bad.

When I last went through this, I first tried to use Norton Ghost to clone my 80GB drive to a 133GB attached as a USB drive, but had difficulty that the

Still hung up at the loading screen. jbrenerJul 22, 2008, 6:54 AM I have the same problem with my Inspiron 8600. It really works to just resize the drive.good luck and good night You and others have hit on the problem. Windows Xp Repair Disk But if you CAN get into BIOS, you indicate that it fails to recognize any SATA device.

That is where I am tonight. I found this wonderful thread after the fourth question! Louis Using The REPORT Button BC Forum Rules Malware Removal Logs Forum Am I Infected Forum Before You Post About A Problem Back to top #6 yu gnomi yu gnomi Topic My Dell rejected it’s original 80 Gb Hdd (after five and a half years of faithful use and international customs mishandling died a peaceful death) which all info was not lost,

Unfortunately it soon happened again. I do not have a flashing cursor like many of you. It was suggested and I was offered a PM which I gladly accepted with WinXP 32 bit Spk 2 USB drivers which are a total of 8 files in three locations. Partition 2 became Drive D and was set to 120GB.

If that is still true, the only suggestion I can make might be a BIOS Reset, which I can describe for you if you need it. jfeltenOct 1, 2008, 7:17 AM Try defragging. Partition 3 was assigned the remaining space and labled Drive E. I expect the older HDD is set to IDE Emulation or something like that, and not to SATA or AHCI.

To solve it, Windows temporarily (only during boot time) is using different way to access the boot disk -- not via usual driver, but via BIOS interface (Interrupt 13h). from the other Dell disk as well. This primal method for starting my computer worked for a while but I knew it was not a permanent solution because I have been told hard drives are somewhat delicate. A common reason for Windows to freeze up or reboot automatically during the Windows startup process is because one or more important Windows files are damaged or missing.

Subsequently I found some of this information in another discussion thread, but mixed with a dose of some ambiguous misinformation too. I haven't tried it yet but:1. So it make sense there is no Primary Slave device.So the real problem is now twofold, as I see it. Then follow this procedure: Clone Your old EIDE Drive to a new PATA Large Drive1.

The screen went blank and after 10.5 minutes of waiting with a blank screen, I gave up on that disk. Your posting sounded like you were simply bragging about 250 USD worth of hard drives. It was assigned Drive C.