Home > Help Me > HELP Me Install My Third 200 Gig SATA Hard Drive :(

HELP Me Install My Third 200 Gig SATA Hard Drive :(

Contents

AearendaApril 26th, 2008, 11:38 PMmazq447: Sorry for not supplying the details, it was night time here :-) I'm glad it is working for you now! If you get these both correct, then the XP installer won't even ask you which driver to use - it'll just load it and recognize the drive. System is already running openSUSE 10.3 which installs fine. I managed the installation of the hardware on my own, but was at a loss on how to assign the drive letter. his comment is here

Unfortunately, this tool won't work in this case. After replacing the board drive spin up great and now I was able to see a external drive in "my computer". Restore Deleted Files After Emptying the Recycle Bin If, rather than entire hard drive recovery, you just need a simple method for restoring files that have been deleted from the recycle And i just found a HD loader for the wii to play backups off of the External Drive without burning! http://www.tomshardware.com/answers/id-2289158/put-3rd-hard-drive.html

Easeus Partition Master

You found this article on a website specialising in PC mechanics, aimed at it's own users, who are already computer literate. Worked a treat.. Took it to repair shop to check it out.

Actually 2 such messages. Terry Reply October 18, 2015 Thank you so much! To others out there who are stumped by techy terminology, I suggest browsing a little bit more sites & things will fall into place. Western Digital Reply Donna on September 30, 2008 at 1:08 pm Hi, Just read your article and i'm sure i've done all the physical installation correctly of my second/slave IDE.

Warning: you are doing this at your own risk! Partition Magic Up till then there were no problems…. No error message or anything, just reading the floppy. https://books.google.com/books?id=Pm5dgifyNU4C&pg=PR41&lpg=PR41&dq=HELP+me+install+my+third+200+gig+SATA+Hard+drive+:(&source=bl&ots=RZDlHbbiTi&sig=-0CSocfAeqmyL0s3HMCIwg0AWe4&hl=en&sa=X&ved=0ahUKEwifocKFldnRAhVE4YMKHVu Sense: Logical unit communication CRC Error (Ultra-DMA/32) end request: I/O error, dev sr1, sector 1384512 Sense key: Hardware Error [current] SQUASHES error: sb-brod failed reading block 0xa8789 SQUASHES error: unable to

Blake Carpenter Reply August 25, 2013 After I recover data to a different drive is it ok to then move that data back to the drive it came from? It looked great immediately after the upgrade, but then I ran the 'updates' and it's been stuck with busybox everytime, unless I pick an older version from the grub menu. Clement Reply January 12, 2017 I have a dead (MBR error/ partition deleted)HD SATA 500 GB and all efforts to retrieved my valuable data proved futile. Thanks, Tooz Keith Reply January 27, 2013 Go to start than run and type in cmd then enter.

Partition Magic

Please be sure to take your drive to a professional the first time if the data is important. https://jcalcote.wordpress.com/2008/01/05/installing-windows-xp-on-a-sata-drive/ Reply Robert on October 25, 2008 at 3:50 pm Great Article. Easeus Partition Master I need my normal files, the one I can see, but cannot copy. Minitool Partition Wizard Problem is , that there is very little space left on the system drive.

thanks. I did have just a couple of questions. I tried the Intel Matrix SATA drivers but to no avail. I have downloaded the image X3 and also the alternate install image and get the same error. Seagate

while windows xp runs on the original drive? But today I tried to plug in HDD again, I couldn't see from both Disk Management and MY computer, even when I want to run Fat32Formatter to reformat, I could not Select a location on your hard drive. fiona says: 8 years ago Ok the FAT32 format in DOS didn't complete.

Reach out to Gillware and get an estimate. Worked like a charm and I booted into the Live CD. Hitachi's Feature tool was crashing when trying to enter Capacity menu, but this little great tool restored disk back to useable state and data is safe!

If you like what you see, you can purchase the full version right then and there without even having to close out of the program.  I personally have had lots of

That's disappointing. Edit: Didn't work. Turned out to be booting 7.10 still, and when I edited grub to 8.04 I trashed the machine. The giveaway is that the BIOS does know how big the drive is, and displays it during the prestart.

no partition. the raid mode is also a bit slower as the AHCI mode during system boot (the grub boot loader comes later) as you can see here AHCI is an published standard Took just a few seconds and my 320gb HD was formatted to Fat32 Gian says: 7 years ago hey thanks! Then either type gparted at the command window that pops up, or select it from the menu.

I cant depend one just one so I have about 7 iso burned. Running the Nvidia restricted drivers as well as Compiz Fusion went flawlessly, no issues with sound like I had in Gutsy either. right now i'm at work but i will give the -- pci-msi parameter a try.. And now I had the added problem of not having a working floppy drive in which to add the drivers during the installation process.

I have 2 sata drives and one IDE cd-rom. That seemed to get rid of DDO, yet the BIOS still said the drive was only ~32 GB. Thanks for help. Moment later my technical friend suggested usage of third party application called Remo Recover, used it and the result was overwhelming.

If you already have XP installed on your SATA drive - done while configured as an IDE drive - then you have two potential problems: 1) The SATA drivers that come So I tried to unplug the power right before I typed y to continue, but that didnt work. (Note: I had to do the "At your own risk" method of unplugging Hardware: AMD64 3700+ ASUS A8N-E mb 2 Samsung SP250 SATA-II hd Edit: Tried installing from the alternate cd, but it can't even detect/mount my cd drive during installation. I had done everything i could think of.