Home > Having Trouble > Having Trouble Trying To Set Up A LinkSys Wireless LAN Card W/Existing Wireless LAN

Having Trouble Trying To Set Up A LinkSys Wireless LAN Card W/Existing Wireless LAN

Contents

Include the ping to your radio. gv: Thanks very much for your response. He had this all set up and it was working, not sure who set it up, but it stopped working and there have been a couple of people who have " Remove the automatic selection option and click OK to accept the change. have a peek here

For testing purposes, move the computer closer to the router and minimize interference from electrical devices. AjeT says: at Thanx mahn…all I needed to know was the default IP of the Access point. Figure : Network Connection menu In the Network and Sharing Center, click Manage network connections. I also depends on the hardware. http://www.linksys.com/my/support-article?articleNum=142912

Linksys Extender Setup

My network is as such: Primary Router (Internet Connection): WRT54G V5— stock Linksys firmware— 192.168.1.1 Secondary Router (For the Bridge): WRT54G V3— DD-WRT V23 SP1 Firmware— 192.168.1.1— which I changed to Why did you do that?Is 192.168.0.1 the IP address of your main router which has the internet connection?Which IP address did you assign to the second router?Did you really connect both Refer to my reply to drastant for details. It is also possible to connect to a network that does not actually exist.

YOU ARE SOLELY RESPONSIBLE FOR (AND BELKIN DISCLAIMS) ANY AND ALL LOSS, LIABILITY, OR DAMAGES, INCLUDING TO YOUR HOME, HVAC SYSTEM, ELECTRICAL SYSTEM, PLUMBING, PRODUCT, OTHER PERIPHERALS CONNECTED TO THE PRODUCT, This wiMax device (Samsung SMT-S3500), does not have option for wirless access. All provisions of this Agreement except for Section 1 and the limited warranty in Section 12 (the first paragraph) will survive termination. 11. Wireless Repeater Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading...

In the last 2 hours i figured out that i needed to turn off dhcp and change the ip... Client Bridge Thank you Tariq says: at hi i am not able to login to the wap54g when i am typing 192.168.1.245 in the browser its telling Internet Explorer cannot display the webpage Figure : Diagnose and repair in the Network and Sharing Center Step 3: Make sure the wireless network connection is enabled The connection to a wired or wireless network can be https://www.dd-wrt.com/wiki/index.php/Wireless_Bridge I have the gateway in one room, and the three desktops in another.

Please see A Practical Example for a fully documented example of making this work.) [edit] WPA-Personal So I just bought a WRT54GL Ver 1.1 and I'm new. Linksys Wrt54g If i start my laptop downstairs it will see the wap54g but not the motorola when i go upstairs. In relation to consumers who are entitled to the benefit of the CGA, the media on which Software is provided comes with guarantees that cannot be excluded under New Zealand law, I have one wireless VoIP phone here which cannot handle it whatever I do.

Client Bridge

Figure : Opening the Network and Sharing Center Click Network and Sharing Center in the Programs area. http://routersetup.blogspot.com/2007/08/connecting-two-routers-wired.html Primary: WRT-54G2, Secondary: WRT-54GL. Linksys Extender Setup To determine which network the computer is currently connected with and to select the network you want to use, do the following. Linksys Router Each of the United Nations Convention on Contracts for the International Sale of Goods and the United Nations Convention on the Limitation Period in the International Sale of Goods is hereby

Start Live Chat Agent Currently Unavailable Twitter Post your question to Twitter anytime. navigate here If the desired network is listed, but not connected, select it and click Connect. If you are running an advanced network which includes routing through the bridge, things go wrong pretty quick. Alle uitgaven doorzoekenVoorbeeld van dit tijdschrift weergeven » Bladeren in alle uitgaven 2001mei 2001jan 2002feb 2002maart 2002april 2002mei 2002juni 2002juli 2002aug 2002sept 2002okt 2002nov 2002dec 2002jan 2003feb 2003maart 2003april 2003mei 2003juli Linksys Default Password

The computer is connected to your home wireless network and you have access to the Internet, but the connection is slow or dropped. On my end I have a WAP54G with the same type of directional antenna hooked up. BELKIN IS NOT RESPONSIBLE FOR (I) YOUR FAILURE TO FOLLOW SAFETY WARNINGS, PRECAUTIONS OR ANY OTHER INSTRUCTIONS PROVIDED WITH THE PRODUCT AND/OR SOFTWARE, (II) YOUR NEGLIGENCE IN USE OF THE PRODUCT Check This Out This information changes as the network status changes.

For help, see Creating a Wireless Home Network and Sharing Files in Windows Vista. Wireless Bridge The rights and obligations under this Agreement are not assignable by you, and any attempted assignment shall be void and without effect. Garrett says: at I input 192.168.1.245 and it asks for credentials.

I'm going to assume SSID broacast is required for this to work, which is unfortunate... ---shifuimam 2008-05-09 If you have an apostrophe in your SSID you will not be able to

We cannot guarantee that it is correct or up to date. Step 5: Disconnect from the network and manually re-connect A common problem with a lost connection or poor network connectivity, is accidental connection to the wrong network. Can you tell me which mode (ap, bridge,etc) to use for the wap54g? (These things hate me and they do anything they can to destroy my pursuit of a happy day!!) Wireless Access Point Please post help then I would be great thankful to all !.

I am assuming they are access points. ( Buffalo WHR-HP-54G)He asked me if I knew anything about networks, and I have toyed around with "simple" stuff, but this stretches me working Try accessing the web from your computer. BY CHECKING THE BOX OR CLICKING THE BUTTON TO CONFIRM YOUR ACCEPTANCE WHEN YOU FIRST INSTALL THE SOFTWARE, YOU ARE AGREEING TO ALL THE TERMS OF THIS AGREEMENT. this contact form Thanks again.Ravi May 25, 2011 at 5:17 AM Luis Fernando said...

on the reset switch and you'll get back the original IP address. soda says: at @AGKhan - access your router's UI and go to the Administration tab then Management Sub-tab set the Remote Router Access (Remote Management) to ENABLE.