HD On Raid Or IDE3 Wont Let Puter Power Up
solved Resetting PC messed up. They both appear as "Master" though. I had no intention of recomissioning the server either. After all, the first SATA drive works. http://inc1.net/hard-drive/hd-grinds-when-puter-is-idle.html
Back again. Full Review HighPoint RocketRAID 2720SGL 8-Port PCI-Express 2.0 x8 SAS/SATA... But no luck here. This tells me that new drive is probably dead. http://www.tomshardware.com/forum/289729-32-hard-drive-power
G Drive Won't Turn On
The first from the Wiki........ I suggest just ACHI. basically it would get stuck on the ACPI Controller message in POST, and refuse to move ahead. After scaling down to 1.5 Gb/s the drive worked flawlessly without any change to BIOS settings.
In regards to flashing the BIOS. This shouldn't make a difference should it ? 73ckn797January 30th, 2009, 01:32 PMI have the boot process with the CD ROM as 1st boot and hard drive 2nd but have always any advice would be great. External Hard Drive Not Powering Up I swopped the two hard drives around and put them on different channels just incase the boot process point towards a certain sata channel.
ftool. - Reprogram the drive to 1.5 Gb/s using ftool. - Then reinstall it in the target machine with the buggy chipset. " Help appreciated !!!! Not sure if this makes a difference. So here is what it is doing now, i have my single 1tb western digital blue hard drive that has my legal copy of windows 7 64 bit on it set https://arstechnica.com/civis/viewtopic.php?f=8&t=832481 Has been set to ATA all this time but with a Sata hard drive yet working fine.
When I turn on the computer with no hard drives it gets to the screen saying incorrect boot please insert disk etc. (set to boot to CD Drive first). G Drive Support When I connect up a second sata hard drive to my motherboard the computer freezes and I cannot get into the bios. If you do not want to read the background i put up to help explain my situation skip to the second to the last paragraph for my problem in a nut Even when I am in the bios with the two connected.
External Hard Drive Wont Turn On
You said you swapped SATA ports, have you swapped cables as well? https://ubuntuforums.org/archive/index.php/t-1054871.html popatim, when i created the raid volume it did not ask if i wanted to delete the contents of the drives. G Drive Won't Turn On In the final analysis, you may need a SATA adapter card. Hard Drive Won't Power Up Have you tried to let the computer run for AT LEAST three minutes to see if it continues?
solved Setup a RAID0, now existing boot drive wont boot solved RAID 1 - Now OS won't boot solved PC Froze, now won't boot into windows past automatic repair. his comment is here Your Hitachi SATA-II drive has been set to SATA-I speed. Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About Tom's Hardware egalvanJanuary 30th, 2009, 02:18 PMBy "computer freezes" do you mean the computer does not run AT ALL? Hard Drive Wont Spin
Highly un-likey, but it may be that the mobo may not recognize SATA-II drives. Your drive is almost certainly DOA (Dead on Arrival). When I connect up a second sata hard drive to my motherboard the computer freezes and I cannot get into the bios. this contact form However there are a few buggy chipsets that can't do that: VIA and SIS chipsets VT8237, VT8237R, VT6420, VT6421L, SIS760, SIS964 (see Wikipedia).
it detects my hard drive looks something like this IDE MASTER - Not Detected IDE SALVE - Not Dectected IDE 1 - Not Dectected IDE 2 - Not Dectcted IDE 3 If I press Del (to enter setup) the screen goes black and monitor switches off. BigmonFebruary 5th, 2009, 03:57 PMI had a similar problem.
Read ALL the instructions on your MB maker's website BEFORE you do the upgrade.
Just because you don't have a message about an illegal Windows copy does not mean yours is not. Anyway thanks again for the help, this has been stressful but at least i learned that it is not a smart thing to try and learn by trial and error when Won't let me run Lifeguard diagnostics More resources See also solved Toshiba 3.0 1TB External Hard Drive Won't Show up in This PC or Disk Management solved PSU won't power computer I plugged the second one in, using the second set of leads that came with the motherboard, and successfully partitioned it and got it running.
This update solved the problem of SATA drive not being recognized at boot, but still neither XP nor Ubuntu can make use of it. I wanted to swop it with a IDE HDD since I know that the BIOS recognises the two IDE channels no problem. solved While Cleaning CPU touched it without being grounded and now pc wont boot New Components, Now PC Won't Boot solved Windows 10 System Restore Failure! navigate here I tested every drive, and they all behaved weird, but I was able to format them and use them in my other machines.