Home > Hard Drive > Harddrive Full Capacity Not Being Recognised (33GB Instead Of 160GB)

Harddrive Full Capacity Not Being Recognised (33GB Instead Of 160GB)


It shows the total capacility as 8.4GB for both drives (the same as the native 8.4GB drive which is already in the machine). Trigger, I was talking about different units, I didn't say Windows does not use binary units. And there's always the possibility that the MasterBootRecord is out of whack. All rights reser ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: Connection to failed. http://inc1.net/hard-drive/hd-full-capacity-not-recognized.html

This started being a problem around 1993, and people resorted to all kinds of trickery, both in hardware (LBA), in firmware (translating BIOS), and in software (disk managers). Plus it would allow me to test test that one IDE drive which I worte about in another thread - the one which seems to "knock out" any IDE detection until Seems like some tools like scandisk can't handle larger drives as well (the 127GB limit), but that really shouldn't be a problem in NT based OSes. Connect with him on Google+. https://forums.techguy.org/threads/harddrive-full-capacity-not-being-recognised-33gb-instead-of-160gb.481540/

Hard Drive Showing Wrong Capacity

not to mention the different partitions that are used. Doing this still had the effect of causing the BIOS not to see the primary master channel. I can't even see the extra 220 unallocated gb with any programs. That will be tested later.

EZ-BIOS seems pretty simple to install and use and I have had it on a machine for years without issues. I only installed a VESA video card, a VESA disk controller and 4MB of memory. I actually do have a 40GB and 80GB drive installed in newer machines which I plan to replace with either a 120GB or a 250GB drive (I have to test both). 500gb Hard Drive Shows Only 130 Gb Of Space Click Start, type partitions, and select the Create and format hard disk partitions shortcut to open it.

Please try the request again. Hdd Capacity Restore I think you'd be a lot better off using something from a little later on so that you wouldn't be facing a major dilemma every time you tried to install another If this is the case there's not much you can do with them. September 9, 2012 Skywagon Enjoyed the article.

Hmmm, what models are the WD drives? Hard Disk Space Showing Less Than Actual I was using an overlay on my 386 for a 8.4 GB HD split up into 4 equal partitions. See also over2gb.htm (http://www.firmware.com/support/bios/over2gb.htm). No issues seeing both drives and no delay during boot.

Hdd Capacity Restore

For me it looks like the unfair market practices: http://en.wikipedia.org/wiki/Byte#Unit_multiples August 30, 2012 neumac In german speaking countries (where I hail from), us geeks consider GiB (2^10 = 1024) the correct More hints Files in Windows’ aptly named “shadow storage,” also known as “shadow copies,” don’t appear here. Hard Drive Showing Wrong Capacity At this point you may have to purchase an advanced version of a disk manager, and given the added cost, it may be prudent to purchase an add-in hard disk controller Hdd Capacity Restore Windows 10 http://support.microsoft.com/kb/310525/ http://www.allensmith.net/Storage/HDDlimit/FAT32.htm You also need Windows XP SP 1 to recognise above 137GB hard drives.

Actually i still have wondered but this information was required during RAID configuration and i came to know. Check This Out And it finds a home for all these smaller drives. Please refer to our CNET Forums policies for details. An error (403 Forbidden) has occurred in response to this request. Hard Drive Not Showing Full Capacity Windows 7

When the first HD's came out, they were MUCH less reliable than now. We bought a several petabyte array from Hitachi and came up short on the storage. Joe StoneMarch 20th, 2015, 10:44 AMThere are other options to get around this obstacle. http://inc1.net/hard-drive/hd-and-memory-not-at-full-capacity.html stone beat me to the posting, but it appears we have a difference in our explanations.

The 137 GB limit (Sept 2001)As mentioned above, the old ATA protocol uses 16+4+8 = 28 bits to specify the sector number, and hence cannot address more than 2^28 sectors. External Hard Drive Only Showing 32gb I dont know if this could have anything to do with it? HDD technology predates Apple, Microsoft, and most other modern operating systems.

hargleJanuary 30th, 2015, 10:41 AMIt's DOS itself that has the 8.4G limit.

The HDD on the shelf at Best Buy may go into a Windows, Mac, Linux, Xbox, etc. The 4.2 GB limit (Feb 1997)Simple BIOS translation (ECHS=Extended CHS, sometimes called `Large disk support' or just `Large') works by repeatedly doubling the number of heads and halving the number of I think you'd be a lot better off using something from a little later on so that you wouldn't be facing a major dilemma every time you tried to install another Why Does My Hard Drive Not Show Full Capacity UDMA) are a different matter, but all PATA drives support mode 0 PIO, AFAIK.

The OEM has no control over vehicle (car, truck, lawn mower, chain saw); conditions (hot, cold, high altitude); driver (grandma, racer, etc). http://support.microsoft.com/kb/184006/EN-US GrandcheapskateMarch 7th, 2015, 12:41 PMOk Guys, thank you for those reponses. and this is do to the fact that MicroCRAP does not believe in 1000bytes= a megabyte. have a peek here Hard drives over 137.4 GB are supposed to report an LBA capacity of 0xfffffff = 268435455 sectors (137438952960 bytes).

This is obviously because the machine does not acknowledge there is a primary master device. Maybe you can help. Thanks...Joe StoneJanuary 31st, 2015, 11:45 AMI think it comes down to this. That’s a difference of 7 GB or so – where did all those GBs go?

also NTFS partitions use more space than FAT16 or 32. And I still have to work out the math as to why EZ-BIOS did not like the 120GB drive. an HDD), I've recently looked at a disk in Ubuntu that displayed its size in MiB, and the fact that RAM isn't the same technology is irrelevant to the discussion. Add a new "regional" setting to select binary or decimal file size display.

Discussion is locked Flag Permalink You are posting a reply to: Formatted new 250 gb hard drive, only 32 gb shows up The posting of advertisements, profanity, or personal attacks is External drives, whether actual hard drives or Flash Memory Sticks and their ilk come to mind. Windows will not report the disk space used. I was able to leave the BIOS as AUTO for everything and still boot to the EZ-BIOS diskette.

I believe EZ-BIOS is only needed when your motherboard BIOS is incapable of using LBA mode. Was going on there then? See if the system boots and if it does... GrandcheapskateMarch 13th, 2015, 08:03 AMYou may not be able to achieve 120 GB with your BIOS regardless of the overlay.

any tips please would be greatly appreciated. There are several reasons Windows could display the wrong amount of available space, from invisible shadow files, formatting overhead, and hidden recovery partitions to misleading (though technically accurate) storage capacities advertised Joe GrandcheapskateMarch 11th, 2015, 09:17 AMOk Guys...here's what happened yesterday. See over3gb.htm (http://www.firmware.com/support/bios/over3gb.htm).

August 30, 2012 nwidesigns @r you are so right and I do everything I can to engage my customers and educate them about things such as this.